BBCJX - PC12-007,PART B.

Product Identification

Product ID:PC12-007,PART B.
MSDS Date:01/01/1985
FSC:6850
NIIN:00D000150
MSDS Number: BBCJX

Responsible Party
HYSOL DIVISION,THE DEXTER CORP.

Emergency Phone: 716-372-6300

Cage: DO953

Contractor
HYSOL DIVISION,THE DEXTER CORP.
OLEAN, NY 14760-1297 US

Telephone: 716-372-6300/6309

Cage: DO953

Ingredients

DIBUTYL PHTHALATE (SARA III)

CAS: 84-74-2

RTECS: TI0875000

Fraction By Weight: 28.0%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3; 9192

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

Hazards

Effects of Overexposure:NONE EXPECTED FROM FORESEEABLE EXPOSURES.

First Aid

First Aid:EYES:FLUSH WITH WATER FOR 15 MIN.CALL DR. SKIN:EMULDIFY WITH
5% ACETIC ACID SOLUTION,RINSE,THEN WASH WITH SOAP & WATER.

Fire Fighting

Flash Point:338F COC
Lower Limits:0.5
Upper Limits:2.50
Extinguishing Media:CO*2,DRY CHEM.FOAM.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:SCOOP UP EXCESS,SCRUB AREA WITH 5% ACETIC ACID
SOLUITON TO EMULDIFY,RINSE WITH HOT WATER.

Handling

Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED.

Exposure Controls

Respiratory Protection:NONE
Ventilation:LOCAL EXHAUST & MECHANICAL
Protective Gloves:PLASTIC OR RUBB
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE,BATH,SAFETY SHOWER.
Supplemental Safety and Health
ITEM IS PART OF A KIT,MADE OF 2 PARTS A & B. PART B IS COVERED UNDER
THIS NSN.PART A IS COVERED SEPARATELY UNDER SAME NSN

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:635F(DECOMP
Vapor Pres:<.1
Vapor Density:9.6
Spec Gravity:0.90.
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE.
Appearance and Odor:LIQUID
Percent Volatiles by Volume:0.0.

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:STRONG ALKALIES,ACIDS.
Hazardous Decomposition Products:CO,CO*2

Disposal

Waste Disposal Methods:INCINERATE IN FURNACE OR BURY IN APPROVED
LANDFILL,N.Y.STATE DOES NOT PERMIT BURIAL OF LIQUIDS.SEL.QTY BY
MIXING WITH EPOXY RESIN BEFORE LANDFILL BURIAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.